A sawmill makes its own fuel. Every cut throws off sawdust and fines, and every shift the stuff settles on beams, belts, and motors and collects under the machinery where nobody can see it. Add hot equipment and hydraulic oil in a cramped building and you get what Hazard Control Technologies calls a perfect storm. When it goes, it does not stay small.

The fuel is already in the building

Lumber operations carry three problems at once: combustible dust, heat, and oil under pressure. None of them is unusual in a mill. All of them together, in a tight production space, is the setup.

“Sawdust, specifically, is both an explosion and fire hazard. An accumulation of sawdust alongside hot machinery and hydraulic oil can quickly create a perfect storm.” — Hazard Control Technologies

The cost arrives fast. HCT puts the damage from a single piece of machinery at upwards of $300,000, before you count the weeks of downtime and lost revenue. And the building works against the people fighting the fire. A cramped production floor lets flames spread quickly, and it makes the fire hard for first responders to reach, move through, and put a line on.

One mill, four classes of fire

A mill fire is rarely one kind of fire. Wood and sawdust are Class A. Hydraulic oil and diesel are Class B. The motors and panels are energized, and the equipment can include combustible metals. Protection built for one class at a time leaves gaps, and the lumber industry has been living in those gaps.

“Fire mitigation is a struggle for the lumber industry due to a lack of protection against multi-class hazards.” — Hazard Control Technologies

F-500 EA, from Hazard Control Technologies, the manufacturer of the agent, is an Encapsulator Technology — not a foam and not a powder. It is listed under NFPA 18A for Class A and for both two-dimensional and three-dimensional Class B fires, which fluorine-free foam is not built to handle. Fifteen years of third-party testing backs it on Class D and lithium-ion battery fires as well. One agent, fluorine-free, at manufacturer-specified rates: 1% for Class A, 3% for Class B, C, D, and lithium-ion.

Stop it before it starts

Most mill fires do not begin as emergencies. They begin as housekeeping. Dust gathers under equipment, nobody gets to it this week, and the next hot bearing finds it.

“Encapsulator Agents double as powerful preventative agents.” — Hazard Control Technologies

That is the part of the lumber story most departments never hear. HCT points out that even wet operations need protection, because dust still collects underneath the equipment when housekeeping slips. F-500 EA can be applied ahead of time to logs, lumber, and oil and fuel spills for up to two weeks of fire resistance. The same agent cools processing equipment, such as a failing bearing, before it becomes the ignition source. And for the crew doing the work, the TKO Nozzle carries a half-gallon reservoir of concentrate and flows 20 GPM, which makes it as useful for housekeeping in a confined space as it is for knockdown and overhaul.

Protection that is already in place

For a facility that wants the answer installed before the first call, the Diamond Doser is a water-driven proportioner. It is a compact, one-piece unit that injects concentrate into a new or existing sprinkler system using water flow alone. The mill keeps the sprinkler system it has. What changes is what comes out of it.

What it means in Northern California

Timber country runs from the north coast through the Cascades and down the Sierra, and the mills, planing operations, and wood-products plants that serve it often sit well outside an urban response grid. A fire that starts on the mill floor may be fought first by a small district, in a building the crew has never walked, in a room full of dust. A pre-plan, a pre-treated floor, and an agent the crew has actually trained with change that call.

The best mill fire is the one that never gets a start. The second best is the one that loses in the first few minutes.

Next week we move to the airfield.

On-site training is available for your department or facility. Contact us at ControlHazards.com to schedule yours.