Our Pinnacle foams are high-quality firefighting agents offered at an economical price. Pinnacle is available in three formulations to cover a broad spectrum of firefighting challenges. All three foams are designed for the maximum penetration possible while providing a durable, thick foam. These high-performance foams offer fast knockdown and maintain a quality blanket. All Pinnacle foams are suitable for use in Type III nozzles, monitors, foam tubes, CAFS and fixed suppression systems, including HCT’s CCS Systems and can be used with fresh, brackish or salt water.
Pinnacle Class A Foam
Class A fires are the most common fires encountered by firefighters. In many cases, plain water is used, but economical, Pinnacle Class A foam makes water more effective. In areas where water is not available, Pinnacle Class A foam can make the difference by making the water on your truck stretch farther. Pinnacle Class A foam forms a thick, wet blanket that smothers, penetrates, clings and lasts. Pinnacle foam is noncorrosive and environmentally friendly.
- Proportioned at 0.1 to 1.0%
- Available in 5-gallon pails, 55-gallon drums and 250/275-gallon totes
Pinnacle 3% AFFF
This quality foam spreads rapidly over the surface of the fuel forming a thick foam that seals the fuel and vapors. Pinnacle AFFF provides quick knockdown and prevents the fuel from spreading. It has been tested to comply with all applicable standards of UL 162, Foam Concentrates, and NFPA 11 and is UL Listed at a proportioning rate of 3% for all Class B, nonpolar fuel fires.
- Proportioned at 3.0%
- Available in 5-gallon pails, 55-gallon drums and 250/275-gallon totes
Pinnacle 3X3 AR-AFFF
In today’s world of ethanol-blended fuels for automobiles, Pinnacle 3×3 AR-AFFF was developed to extinguish both polar and nonpolar Class B fires. Pinnacle 3X3 provides quick fire control by forming a thick, polymeric layer across fuels that mitigates vapors and self-seals if the foam blanket is broken. Pinnacle 3X3 AR-AFFF contains polysaccharides, which form a pseudo-plastic film on the surface of polar solvents. This Pinnacle foam provides more stability and better burn back resistance than conventional AFFF.
Pinnacle 3X3 AR-AFFF has been tested to comply with all applicable standards of UL 162 and NFPA 11 and is UL Listed at a proportioning rate of 3% for all Class B, polar and nonpolar fuel fires.